Battery Charger Controller - Series PBCC
Function:
Charge controllers are designed for automation of Battery Charging in Panel Boards. Many 
electrical control systems requires battery back-ups.
To keep these batteries in healthy conditions, it is desirable that a reliable charging system should e built in. Charge controllers automatically selects mode of charge- Boost/ Trickle. It protect the charging system from over load, Reverse Battery Connection.
Application: 
AMF Panel, Relay Panel,
Annunciation Panel. Five Alarm Panels.
Operating Principal:
Battery Charger Controller series PBCC regulates primary volts of Step down transformer in relation to battery volts and current. It has Constant Current(CC) Constant Volt (CV) mode auto selection. In built circuit checks the current drawn by the battery. If it exceeds the set limit, CC circuits operates resulting in reduced voltage to keep current constant, If current drawn is within the set limit, CC is off and out put voltage will be as per voltage set. This ensures quick charging of battery and no chance of over charging it.
Specifications:
Mains Supply : 230 V AC +/- 10 % 50 Hz. 
Battery Volts : 12 V / 24 V.
Charging Current : 10 / 15 A.
Sensing : a) Battery Volt
b) Current- built in CT
Mode selection : Automatic
Boost / Trickle
Protection : a) Over Load
b) Battery Reverse Connection
LED Indications : a) Mains
b) Boost
c) Trickle
d) Battery Reverse
Mounting : Flash
Terminals : Reverse terminals.
Enclosure : ABS Molded
Dimensions : 96 x 96 x 65 (D) mm
Cut out : 92 x 92 mm
Selection Chart 
| Model No. | Nominal Battery Volt |
Max. Charging Current |
Recomended Transformer |
Recomended Bridge |
|
| P/SVoltage | V A Rating | ||||
| PBCC 1210 | 12V | 10A | 230/16 V AC | 200VA | 25A |
| PBCC 1215 | 12V | 15A | 230/16 V AC | 300VA | 35A |
| PBCC 2410 | 24V | 10A | 230/32V AC | 400VA | 25A |
| PBCC 2415 | 24V | 15A | 230/32V AC | 550VA | 35A |
